SPECIFICATION
• 1.2m³ Hopper
• Width – Only 1.97 metres wide with an overall length of 3.76metres.
• All metal work blast cleaned, prior to zinc rich powder prime and finished in Polyester Powder Finish.
• Hydraulically driven spinner, with adjustable spread width from 1.8m to 6m with symmetric and asymmetric patterns achievable.
• 60 Litre hydraulic tank "Pozi – Feed" double Auger providing positive salt feed even with wet material, adjustable application rates from 0 to 150kgs per min driven hydraulically through a heavy duty planetary gear box.
• All hydraulics driven from a hydraulic pump coupled to a Yanmar Diesel Engine with Key Start.
• Galvanized pitched mesh which can be opened.
• Twin axles fitted with suspension and automatic brakes, road going wheels and tyres.
• Jockey wheel and handbrake.
• Full Road Lighting kit with high quality lighting components.
• Stainless Steel fasteners used through-out.
• No control boxes, simple use of the vehicle fog light switch controls the spreading action.
• Fluorescent markings on the rear
• Unladened weight 930kgs.
• Maximum laden weight of 2600 kgs
The VCS 1.2D trailed spreader is built specifically for use with suitable towing vehicles. Its twin axle chassis is fitted with automatic brakes and axle suspension for use in car parks, Distribution Centres and town centres.
Simply hitch onto the towing ball or pin of the vehicle, plug in the standard 7-pin lighting socket, as used with any road going trailer and away you go! Simply Key start the Yanmar Diesel engine and use your fog light switch inside your vehicle to switch a hydraulic valve on and off, this starts and stops the spreading action! The hydraulic pump is driven from a the Yanmar Diesel engine; this provides ample power to drive the pozi-feed twin augers even with wet material.
The VCS 1.2D has features that make this trailed salt spreader stand out from its competitors - Its braked and suspended twin axles enable it to travel at a high road speed between sites and therefore allow shorter shift times, the large 1.2m³ capacity allows for less fills on the shift. Its 6 to 8 metre spread width allows it to treat sites quickly and effectively. The augers feed the salt accurately applying the salt precisely and therefore saving money on over applied salt and time with un-required fill ups.
